T.I.P.S., Inc. 241 South Poplar Street D'Lo MS 39062 USA
Phone:(601) 927-4611 mail: ray@tipsinc.tips
Phone:(601) 927-4611 mail: ray@tipsinc.tips
Even the best amplifiers can perform and sound better with a little help. Here's what you can expect:
These modifications improve dynamics, channel separation, musical detail and information. You can also expect a greater signal to noise ratio,
better sound stage and image, smoother midrange, more natural overall sound, more headroom and damping factor, softer clipping, extended
low end response and more power output.
The power supply fets are changed to parts with double the current capability of the factory devices, the storage capacitors are changed to
parts with over double the storage and filtering than the stock components. The transformer's current and voltage capabilities are also
increased. The pre-amp and output stages are also refined and improved with various additional parts and part changes to improve the overall
sonic capability of the amp.
| LP50, LP50Z, DPS-200 | $160.00 |
| DPSQ50 | $245.00 |
| 4.1HVS, 8002SW | $250.00 |
| 502HV, 5002, 5002IQ, 3.2HV | $235.00 |
| LP100, LP100Z, DPS350 | $185.00 |
| LP150, LP150Z, DPS500 | $215.00 |
| XO-1/XO-2 | $75.00 |
| PA-II, PA-2 Audiopath, PA-IIR, XO-3, XO-4 | $155.00 |
| 1752, 1752S, 2002, 2202, 2202IQ, 2502IQ, 2.2HV | $200.00 |
| 1501, 1502IQ | $185.00 |
| 90, 901, 952, 952IQ, 992IQ | $165.00 |
| 302IQ, LP30, 401, 402, 452, 452I, 452IQ | $150.00 |
| 601, 602, 652, 652I, 652IQ | $150.00 |
| 2601, 2602, 2652IQ | $150.00 |
| 4253IQ | $165.00 |
| 4503IQ | $185.00 |
| 4753IQ | $200.00 |
| Any Model Not Listed | CALL |
| Heatsink Refurbish Stripping and Re-Coloring in PowderCoating Covers most minor scratches and dents Stock and Custom Colors available | CALL |
| Custom Mods Built to suit a particular use will be quoted on each unit and may vary from normal modification rates | CALL |
| Additional models may be able to be modified, rates are available upon request |
| Heat sink Refurbish takes approximately 4 to 6 weeks. Dents are straightened prior to Powder Coating. Pricing is according to size of heat sink |
Reliability or longevity of the product is not reduced by these modifications, in most cases it even improves the reliability. These were the ONLY
factory approved modifications in the industry. The factory warranty was even extended to cover modified units.
These modifications DO NOT decrease the impedance capability of the amplifiers and the stock impedance loads MUST still be observed!
If you need to send your Linear Power product in for modifications, PRINT OUT AND COMPLETE THIS FORM
Carefully package the unit with the form and send it to:
If shipping with the USPS:
TIPS Inc.
PO Box 101
D'Lo MS 39062
If shipping with any other carrier (UPS, Fedex, etc):
TIPS Inc.
241 South Poplar Street
D'Lo MS 39062
Shipping and Insurance costs to send the unit to TIPS Inc. is the responsibility of the customer. It is HIGHLY recommended that insurance for the
full replacement value of your item be purchased from your shipper. TIPS Inc. will NOT be responsible for items that never arrive or that are
damaged in shipment due to poor packaging. Please package your equipment well.
Shipments will be by UPS ground unless other wise requested, the customer is responsible for any and all shipping charges, this includes
additional charges for foreign shipments or shipments to Alaska or Hawaii. Shipping, Handling and insurance charges will apply to each repair or
modification due to increased shipping costs. Shipping fees are determined on weight and your location.
Payment can be made by major credit card over the phone, or electronically through Paypal. Other accepted forms of payment are cashiers/bank check or money order, but you will have a postal delay. Personal or business checks are accepted but you are subject to a possible 15-day delay in processing and clearing of the check once the check arrives to us.